are durable and not easily damaged, making them the first choice for many families. However, if the aluminum door is installed incorrectly, it will cause many problems in future use, and there will be some safety hazards. The following are the installation steps of the aluminum door.
(1) The anti-corrosion treatment on the side of the aluminum door frame shall be carried out according to the design requirements when the design requires. If the design has no special requirements, apply anticorrosive asphalt paint on the sides of the door frame.
(2) Aluminum door parts for installation such as connecting iron parts and fixing parts, except stainless steel, should be treated with anti-corrosion treatment.
In place and temporary fixation
According to the ink line of the door and window installation position, install the aluminum door into the hole, insert the wooden wedges into the installation gap between the aluminum door frame and the surrounding walls, and adjust the horizontal, vertical, and diagonal length of the door frame as well as the shape deviation. Evaluate the standard and temporarily fix it with wooden wedges or other implements.
Connection and fixing of aluminum door and window frame and wall
(1) Welding and fixing of connecting iron parts and embedded parts: suitable for reinforced concrete and brick wall structures.
(2) The connecting iron parts are fixed with tight parts.
Sealing the installation gap between the aluminum door frame and the wall
(1) After the aluminum door is installed and fixed, the concealed project should be checked and accepted first, and the installation gap between the door frame and the wall should be sealed after the inspection is qualified.
(2) The treatment of the installation gap between the door frame and the wall shall be carried out according to the design regulations if the design has regulations. If the design does not specify the sealing material, the cement mortar should be filled, such as the sealing groove on the outdoor side, and the waterproof sealant should be filled.
Install door and window sash and door and window glass
(1) The installation of door leaf and door glass should be carried out after the completion of the surface decoration project of the entrance wall.
(2) The floor spring door should be installed after the door frame and the spring host entrance are installed and fixed. First, insert the glass into the door leaf frame and put it into the frame together, adjust the frame fan gap, and finally fill the glass on the door leaf with sealant.
(3) Swing doors are generally assembled on the wall with the frame and the fan frame. After the installation is fixed, install the glass. First, adjust the gap between the frame and the fan, then adjust the glass into the fan, and finally inlay the sealing strip and fill the sealant.
(4) The sliding door is generally installed after the door frame is installed and fixed, and the matched door leaf is installed as a whole, that is, the glass is installed and sealed in the leaf, and then the frame is installed, and the gap between the frame and the leaf is adjusted.
If you are not very experienced in the installation, you can ask professional staff to operate it. If you still have some doubts about the installation of aluminum doors after reading the above content, you can contact us for detailed information and comprehensive solutions.
As a professional manufacturer of aluminum doors and windows
, we have many years of manufacturing experience in this field. We have advanced equipment and superb processing technology and are committed to providing customers with high-quality and high-performance products. And our strong production and design team can continuously adjust the design and provide professional solutions according to your needs. If you want to buy our high-quality aluminum doors and windows, please contact us immediately!